sportsdunia logo
Search Icon

Advertisement

Advertisement

How to Unlock the Valve Blueprint in StarRupture; Everything You Need to Know

5 min
StarRupture Valve Blueprint
Table of content

The StarRupture Valve blueprint is necessary for advanced crafting and late-game machinery. You’ll need to travel far from your starting area, fight through enemies, and collect multiple keycards in the correct order. This guide will tell you where to find the StarRupture Valve blueprint, how to unlock it, and how they are used in crafting.

How to Unlock StarRupture Valve Blueprint

How to Unlock the Valve Blueprint in StarRupture
image via SiNKiLLeR

The StarRuputre Valve Blueprint location will bring you to the Selenian’s Research Outpost, which is located far to the east of your starting area. It’s a long journey, so be prepared before going out.

  • The blueprint is on the top floor of the outpost, but you can’t get it right away. It’s locked inside a treasure room, and to open it, you’ll need to collect four keycards.
  • The keycards must be collected in a specific order; you won’t be able to progress. Follow the steps below carefully to get all four and unlock the blueprint.
  • This place is far from the start, so it’s a good idea to build a small outpost nearby. Also, be ready for enemy presence, bring proper weapons and plenty of medkits before going in.
  • Make sure you collect the keycards in the order below, or you won’t be able to progress.

You can also learn how to get water in StarRupture by visiting our official website.

Advertisement

First Keycard - Red Leaf Override Card

How to Unlock the Valve Blueprint in StarRupture
image via SiNKiLLeR

Once you reach the satellite complex, look for a large, damaged building.

  • Use the columns in front to jump across to the building
  • Climb up from underneath using a broken pillar
  • On the first floor, you’ll find a dead body
  • Right next to it is your first keycard: Red Leaf Override Card

Collect it and move on.

Second Keycard – Dr Ellis Keycard (Blue)

How to Unlock the Valve Blueprint in StarRupture
image via SiNKiLLeR

From the first StarRupture Valve blueprint keycard location:

  • Jump down toward the broken bridge
  • Move forward across it
  • At the end, you’ll see a small red building
  • Open the door and check the table inside

You’ll find the Dr Ellis Keycard (Blue) lying there.

Advertisement

Third Keycard – Dr. Diaz / Perkins Keycard

How to Unlock the Valve Blueprint in StarRupture
image via SiNKiLLeR

From the red building:

  • Head left and climb the stairs
  • Move forward and jump onto another broken bridge
  • At the end of the bridge, look for a building on the left
  • Go inside and climb to the first floor using the ladder
  • Check the table at the far end of the room for a keycard
How to Unlock the Valve Blueprint in StarRupture
image via SiNKiLLeR

After that:

  • Continue across the broken bridge
  • You’ll reach an open area
  • At the far end, there’s another building
  • Go inside, and on a table, you’ll find the Dr Diaz / Perkins Keycard

That’s your final keycard.

Advertisement

Fanatics Banner

Unlocking the Central Room (End-Game Blueprints)

How to Unlock the Valve Blueprint in StarRupture
image via SiNKiLLeR
  • In the middle of the open area, you’ll see two buildings.
  • Use the debris to climb up
  • Jump across from the green building to reach the red building
  • Inside, go to the top floor
  • You’ll find a card terminal

Insert all three keycards, and the locked door will open, giving you access to all the blueprints available in the game. The Valve is a crafting material in StarRupture. It’s used in multiple recipes and can also be exported if you want to trade or ship it out.

StarRupture Valve Blueprint Cost

To unlock the Valve for crafting, you’ll need to research it at the Recipe Station under the Mega Press category. Here’s what it costs:

  • 1 Valve Blueprint
  • 200 Nozzles
  • 400 Titanium Housing
  • 300 Titanium Rods
  • 1,000 Data Points

Once unlocked, you’ll be able to craft Valves whenever you need them. After unlocking the recipe, head to a Mega Press and use the following materials:

  • 1 Titanium Housing
  • 3 Titanium Beams
  • 2 Titanium Rods
  • 1 Nozzle

Crafting takes 10 seconds and produces 1 Valve. Valves are mainly used to craft advanced machinery parts. Here’s where you’ll need them:
Pressure Tank

To craft a Pressure Tank, head to the Assembler and gather:

  • 2 Valves
  • 5 Heat-Resistant Sheets
  • 3 Titanium Housing
  • 3 Pumps

It takes 12 seconds to craft and gives you 1 Pressure Tank.
Pump

To make a Pump, use the Mega Press and collect:

  • 1 Valve
  • 1 Turbine
  • 1 Impeller
  • 3 Sulphuric Acid

Crafting takes 10 seconds, and you’ll receive 1 Pump.

If you want to build more advanced items, you can check out our guides on StarRupture Electronics.

Advertisement

Skyscanner Banner

Frequently Asked Questions

Where do I get the Valve Blueprint in Star Rupture?

+

You can find the Valve Blueprint at the Selenian’s Research Outpost, which is located far to the east of the starting area. The blueprint is locked inside a treasure room on the top floor, and you’ll need to collect keycards in the correct order to access it.

Do I need all the keycards to unlock the Valve Blueprint?

+

Yes. You must collect all the required keycards in order to open the locked room. Skipping a keycard or collecting them out of sequence will prevent you from progressing.

What is the Valve used for in Star Rupture?

+

The Valve is a crafting material used to make advanced components like Pumps and Pressure Tanks. It can also be exported, making it useful for both crafting and trading.

Conversation

(0 Comments)

Loading comments...
Edited by- Devesh Kumar
Follow Us:
sportsdunia google newssportsdunia google news

Editor's Pick